How to Make Paracord Bush Sandals

If you love spending time outdoors, then you need a pair of paracord bush sandals. These sandals are not only stylish but they’re also comfortable and durable. With just a few supplies, you can make your own pair of paracord bush sandals in no time.

  • Start by measuring your foot from heel to toe, and add 1-2 inches for extra length
  • Cut a long piece of paracord to this measurement
  • Make a loop at one end of the cord, large enough to slip your foot through
  • This will be the toe loop of your sandal
  • Take the other end of the cord and thread it through the toe loop from bottom to top
  • Then pull it tight so that the cord is snug around your foot
  • Wrap the cord around your ankle several times, and then thread it through itself to create a secure knot
  • Repeat on the other side for the second sandal strap
  • Now you can decorate your sandals with beads or other charms, if desired!
How to Make Paracord Bush Sandals


What Supplies Do I Need to Make My Own Paracord Bush Sandals

Assuming you would like a blog post discussing what supplies are needed to make your own paracord bush sandals: “Do-it-yourself” projects can be extremely gratifying. Not only do you get to save money by making something yourself, but you also get the satisfaction of knowing that you made it with your own two hands.

With that said, today we’re going to discuss what supplies are needed to make your very own paracord bush sandals. For those unfamiliar with the term, “bush sandals” refer to a type of footwear that is popular among hikers and other outdoor enthusiasts. They are typically made from some sort of sturdy fabric or leather and have a very rugged sole that is ideal for walking on rough terrain.

While there are many different ways to make bush sandals, we’ll be focusing on how to make them using paracord. So, without further ado, let’s take a look at what supplies you’ll need: -A length of paracord (at least 5 feet)

-Scissors -Lighter -Ruler or measuring tape

-Pencil or pen First things first, you’ll need to gather all of your supplies. As mentioned above, you’ll need at least 5 feet of paracord, scissors, a lighter, and either a ruler or measuring tape.

Once you have all of these items collected, you’re ready to start making your sandals! The first step is to measure out the length of paracord that you will need for each sandal strap. To do this, simply wrap the cord around your foot where you want the strap to sit and then use the ruler or measuring tape to determine how long the piece needs to be.

Once you have the desired length measured out, cut the cord with scissors and set it aside. Repeat this process for the second strap.

How Do I Measure And Cut the Cordage for My Sandals

Assuming you would like a blog post discussing how to measure and cut cordage for sandals: When making your own sandals, it is important to make sure the cordage fits both your foot and the desired width of the sandal. To do this, you will need to first measure the length of your foot from heel to toe.

Then, using a flexible measuring tape, find the widest part of your foot and note that measurement as well. Once you have these two measurements, decide on the width of the sandal strap that you would like and add 3/4”-1” (2-2.5 cm) to that number. This will give you enough room to be able to tie knots in the end of the cordage without it being too tight against your foot.

Now that you have all of your measurements, it is time to cut your cordage. For this project you will need one long strip and two shorter strips. The long strip should be twice the length of your foot plus 1’ (30 cm).

The two shorter strips should each be 1/3 – 1/2 size smaller than the long strip depending on how wide you want your straps (these two pieces will make up the top and bottom straps). With all three pieces cut to size, use a lighter or matches to carefully singe or melt any frayed ends so they do not unravel further.

What Kind of Knots Do I Need to Know to Make Paracord Bush Sandals

There are a few different knots that can be used to make paracord bush sandals, but the most common and strongest knot is the square knot. To tie a square knot, start by taking one end of the paracord and making a loop. Then take the other end of the cord and pass it over the top of the first loop.

Now bring it under the first loop and up through the hole created. Pull on both ends of the cord to tighten. This forms one half of the square knot.

To complete the second half, simply repeat these steps in reverse order. Start with a loop again, but this time pass the second cord over top ofthe first loop before threading it underneath and up throughthe hole. Once again,pull on both ends ofthe cordto tighten everything into place.

How Do I Finish off the Cordage on My Sandals So They Look Nice And Tidy

There are a couple different ways that you can finish off the cordage on your sandals so they look nice and tidy. One way is to use a needle and thread to sew the cordage in place. Another way is to use clear nail polish or super glue to secure the cordage.

Whichever method you choose, make sure that the cordage is securely fastened so that it doesn’t come undone.

Primitive Technology: Sandals


If you’re looking for a fun and unique project to work on, why not try making your own paracord bush sandals? This blog post will show you how! You’ll need some basic supplies like paracord, scissors, and a lighter.

Once you have everything gathered, the process is pretty simple. First, you’ll need to measure out and cut your paracord to the right length. Next, you’ll tie it around your foot in a specific pattern.

Finally, you’ll use the lighter to seal the ends of the cord so it doesn’t come unraveled. With a little practice, you can make a pair of these sandals in no time!


Leave a Reply

Your email address will not be published. Required fields are marked *